Filter
Top Products
21
© 2004 directed electronics, inc.
(one to five times) within 15 seconds. After five seconds, the system
will disarm. If the system does not disarm, you may have waited too
long; turn the ignition Off and On and try again.
Location of Valet
®
Button_________________________________
Number of Presses_____________________________________
The remote will indicate disarm notification with 2 beeps and 3
flashes of the Orange LED.
silent mode
To temporarily turn off the vehicle’s arm or disarm chirps, use
Silent Mode™. Simply press for less than 1-second before
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
The remote responds with the normal arm/disarm notifications
in silent mode. (If the remote has beeps programmed On, the
remote will beep.)
note: The Warn Away
®
response to lighter impacts is
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering. Only the Warn Away
®
response is bypassed.
➜
important! The Valet
®
button can be programmed to
respond to 1-5 presses for the disarm function. You must
check with the installer to verify the programming for
your individual unit.