Filter
Top Products
17
©
2004 Directed Electronics, Inc.
Starter Kill will also prevent the vehicle’s starter from cranking.
The system can also be programmed to arm the optional Failsafe
®
Starter Kill automatically (called Passive Mode). If the system has
been programmed for Passive Mode, the Failsafe
®
Starter Kill will
automatically activate 30 seconds after the ignition has been
turned off. After the ignition has been turned off, the status LED
will flash rapidly to indicate that the system is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible
to program the system for Passive Locking. With Passive Locking,
the vehicle doors lock automatically at the same time that the
Failsafe
®
Starter Kill is activated. If Passive Locking is programmed
on, care must be taken to prevent the keys from being locked in the
vehicle.
NOTE: For Passive Mode to be effective, the Failsafe
®
Starter Kill relay
must be installed.