DeWalt DW168F Automobile Parts User Manual


  Open as PDF
of 60
 
6

WARNING: RISK OF HOT SURFACES
WHAT CAN HAPPEN HOW TO PREVENT IT
• Touchingexposedmetal
(muffler and other engine
parts) can result in serious
burns.
• Nevertouchanyexposed
metal parts on engine during
or immediately after operation.
The engine will remain hot
for several minutes after
operation.
• Donotreacharound
protective shrouds or attempt
maintenance until engine has
been allowed to cool.
WARNING:
RISK FROM MOVING PARTS
WHAT CAN HAPPEN HOW TO PREVENT IT
• Theenginecanstart
accidentally if the flywheel is
turned by hand or moved by
pulling on the pull starter.
• Alwaysdisconnectthespark
plug before performing
maintenance.
• Movingpartssuchasthe
pulley, flywheel, and belt can
cause serious injury if they
come into contact with you
or your clothing.
• Neveroperatethe
engine
with
guards or covers which are
damaged or removed.
• Keepyourhair,clothing,and
gloves away from moving parts.
Loose clothes, jewelry, or long
hair can be caught in moving
parts.
• Airventsmaycovermoving
parts and should be avoided
as well.
• Attemptingtooperateengine
with damaged or missing
parts or attempting to repair
engine with protective
shrouds removed can expose
you to moving parts and can
result in serious injury.
• Anyrepairsrequiredonthis
product should be performed
by a
DeWALT factory
service center or a D
eWALT
authorized service center.
 previous next