Filter
Top Products
Manual # 650340
Please note that the word “switch” in the setup instruction is in reference to the GREEN wire, you
can install any momentary push button switch and use that or simply strip the wire back and hold or tap
the GREEN wire to a +12V source for set up. Once setup is complete, cover the end of the GREEN wire
and secure it so it cannot accidentally be shorted.
To enter setup:
• Press and hold the switch while turning the key on, the gauge should light and show “d
dd
dxx” (xx is
the software code and may be used for tech support).
• Release the switch and “-1-
-1--1-
-1-” should be displayed. Looking at the table, on previous page, press
and release the switch and scroll through until you see “FUL” on the display; this is the screen you
need to get to in order to enter the fuel gauge setup.
• Press and hold switch until “Snd” is displayed, release the switch and a number should be
displayed. This indicates current sender selected.
• Press and release the switch until the correct sender type is displayed. “10
1010
10” for 73-10, “33
3333
33” for
240-33, “CUS” for custom or “CAL” for custom sender programming. The stock fuel sender
(1996-2007) should use the “10
1010
10” setting for correct readings or “33
3333
33” for 2008 and up
modles. If “CAL” is not selected, press and hold until “---” is displayed. Turn the key off.
• If “CUS” is selected, and a custom fuel curve has not yet been programmed, the gauge will
immediately enter the “CAL” routine.
• If “CAL” is selected, the fuel sender curve can be programmed into the gauge. Begin with an
empty tank. The gauge will be showing -00 and switch to displaying the measured resistance.
Press and release the switch to save the empty reading.
• The display will show -33 and then switch to displaying the measured resistance. Add enough
fuel to fill the tank to 1/3. Press and release the switch to save the 1/3 reading.
• The display will show -66 and then switch to displaying the measured resistance. Add more fuel
to fill the tank to 2/3. Press and release the switch to save the 2/3 reading.
• The display will show -99 and then switch to displaying the measured resistance. Add more fuel
to fill the tank full. Press and release the switch to save the full reading.
• Press and hold until “don” is displayed to save the settings. The gauge will then return to normal
operation.
SERVICE AND REPAIR
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any
questions or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most
problems.
Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise
Authorization number. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure
to include the RMA number on the package, and include a complete description of the problem with RMA number, your full name and address (street address
preferred), and a telephone number where you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from
your place of purchase. Send no money. We will bill you after repair.
Dakota Digital 24 Month Warranty
DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in
material or workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital’s option.
This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product. This Warranty
does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse,
neglect, or accident.
This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be
limited to the duration of this written warranty. Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought
within a period of 24 months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than
expressed herein in connection with the sale of this product.
4510 W. 61
st
St. N., Sioux Falls SD 57107
Phone: (605) 332-6513 Fax: (605) 339-4106
www.dakotadigital.com
dakotasupport@dakotadigital.com
©Copyright 2010 Dakota Digital Inc.