Daewoo 450/450Plus Automobile Parts User Manual


 
Diesel Engine Complete Engine
71
Temporarily position the fuel injection pump assembly
and measure the backlash of the gears.
Measure the backlash of all the gears with a dial
indicator.
Gear Housing Cover
NOTE: A noise damper is installed on some
engines. The noise damper must be
installed prior to installing the front oil seal.
Install the front oil seal using tool, Part No. 3824498.
Fill 40 to 60 percent of the space in the seal lip with
grease.
CAU
TIO
N
Do not apply excessive force to the seal lip
surface when aligning and installing the gear
housing cover. Damage to the engine will occur if
the seal is damaged.
NOTE: Apply gasket sealant, Part No. 3823494, to
the gear housing cover mounting surface.
Install the gear housing cover and 17 capscrews.
Tighten the capscrews.
Torque Value: 19 N•m [14 ft-lb]
Measure the distance in height between the cylinder
block and the gear housing cover.
Maximum Height Difference: 0.15 mm [0.0059 in]
00900244
00900182
00900181
00900247