Filter
Top Products
Capacity Plate
13 Capacity Plate
SAMPLE
CAPACITY PLATE
The information
shown on this
sample plate does
not apply to your
truck.
A
B
CAUTION
You may not increase capacity if load
center is less than shown on your
capacity plate.
Note: ANSI B56.1 requires that all
data be shown first in Metric units and
then USA units.
OTHER LIFT HEIGHTS & LOAD CENTERS
Contact Crown for capacities at lift heights or load
centers not given on your capacity plate.
Capacity Plate 14
Know the Hazards
TRUCK WEIGHT
Dockboards, elevators and some floors have limited
capacity. Check your capacity plate for the weight of your
truck. Remember to add the weight of the load
you have on the forks.
TRUCK TYPE
Some truck types are not permitted in areas where there
are fire hazards. Watch for marked areas. For example:
You must not drive a type E or ES truck into an area
restricted to EE or EX trucks.
ATTACHMENT DATA
If an attachment on your truck does not match the
information given here on your capacity plate, don't operate
your truck. Your capacity plate may be wrong. Report
the problem to your supervisor.
MAST COLLAPSED HEIGHT
Some work areas may have overhead obstructions. Mast
Collapsed Height is the minimum height your truck can
clear, providing the backrest and load are lowered below
the top of the mast.
332-001E
RR
Serial Number
Attachment Data
Truck Weight with Max. Battery
Capacity with Mast Vertical
Load
Center
Units of measure, kg/mm(lb/in)
Capacity
Truck Type
Mast Collapsed Height
5200
SERIES
600(24)
600(24)
2260(89)
3325(7331)
E
1234-5678
600(24)
Sideshifter - 100mm (4 in)
SAMPLE
CAPACITY PLATE INFORMATION
The capacity plate is on a console in the
operator area. It contains:
• Serial number
• Capacity information (load, load center and lift height)
• Truck type (a fire safety rating)
• Truck weight with max. battery (does not include load)
• Attachment information (if any)
• Mast collapsed height
READING YOUR CAPACITY PLATE
Capacity may be reduced as lift height increases.
For example: On the sample plate, 2040kg (4500 lb) can
be lifted to 6350mm (250 in). But above 6350 (250), to
7620 (300), capacity is reduced from 2040 (4500) to
1700 (3750).
Capacity is reduced as load center increases. If you
must handle loads with longer load centers, an additional
capacity plate will show the reduced capacities.
7620(300)1700(3750)
2040(4500)
6350(250)