Crown Equipment PW 3500 Automobile User Manual


 
PW 3500 Series
Specifications
1 Manufacturer Crown Equipment Corporation
2 Model PW 3510 PW 3520
3 Load Capacity lb 6000 6000 / 8000
4 Power Electric 12 Volts 24 Volts
5 Operator Type Stand-up Walkie Walkie
8 Lift Height in 9.25 9.25
9 Lift in 6 6
10 Head Length Option 1 / Option 2 in 30.44 29.19 / 35.69
16 Outside Fork Spread Standard Tip in 22 / 27 22 / 27
17 Speed Travel Empty mph 3.3 3.4
4000 lb mph 2.8 3.0
6000 lb mph 2.4 2.8
8000 lb mph na 2.6
PW 3500 Series Standard-Tip Forks
Nominal Fork Length in 36 42 48 54 60
11 Actual Fork Length in 35.75 41.75 47.75 53.75 59.75
12 Overall Length PW 3510 in 66.19 72.19 78.19 84.19 90.19
Option 1 PW 3520 in 64.94 70.94 76.94 82.94 88.94
Option 2 PW 3520 in 71.44 77.44 83.44 89.44 95.44
13 Wheelbase PW 3510 in 44.38 50.38 56.38 62.38 68.38
Option 1 PW 3520 in 43.12 49.12 55.12 61.12 67.12
Option 2 PW 3520 in 49.62 55.62 61.62 67.62 73.62
14 Grade Clearance PW 3510 % 42 37 33 29 27
Option 1 PW 3520 % 44 38 34 30 27
Option 2 PW 3520 % 38 33 30 27 25
15 Turning Radius PW 3510 in 54.60 60.57 66.56 72.54 78.53
Option 1 PW 3520 in 53.35 59.32 65.31 71.30 77.28
Option 2 PW 3520 in 59.83 65.81 71.79 77.78 83.77
7 Truck Weight 6000 lb lb 1310 1326 1342 1358 1381
8000 lb lb 1329 1353 1377 1401 1432
Optional Equipment
1. Transistor on PW 3520-60/80
2. EE rating on PW 3520-60/80
3. Curtis Unigage (discharge
indicator with lift lockout
and hour meter)
4. Discharge indicator
5. Hour meter
6. Quick adjustment caster
7. Quick adjustment caster
with torsion bar package
8. Battery retainer interlock
switch
9. Quick battery disconnect
handle (PW 3520, right
side only)
10. Left side battery connector
(right side standard)
11. Battery compartment rollers
12. Lift-off load backrest
13. Hinged load backrest with
quick release (48", 60" or
72" high)
14. Storage module
(Option 2 battery only)
15. 7" wide fork
(PW 3520-60 only)
16. Drive tire and load
wheel options
17. Toggle switch in lieu of key
18. Tandem load wheels
19. Cold and corrosion
conditioning
20. Special color paint
21. Skid adapter
Maximum Battery Size
PW 3510-60: 7.94" wide x
31.12" long x 23.38" high
PW 3520-60/80:
Option 1 - 6.69" wide x 34.44"
long x 23.38" high
Option 2 - 13.19" wide x 31.12"
long x 23.38" high
Batteries
PW 3510-60: 12-volt, up to
660 amp hour, 7.6 Kwh
Min/Max weight 400/540 lb
PW 3520-60/80:
Option 1 - 24-volt, 330 amp
hour, 7.7 Kwh
Min/Max weight 360/710 lb
Option 2 - 24-volt, 600 amp
hour, 13.9 Kwh
Min/Max weight 815/1400 lb
Standard Equipment
1. 12-volt fused electrical
system (PW 3510)
24-volt fused electrical
system (PW 3520-60/80)
2. Resistor control
3. Polyurethane load wheels
4. Lift-off left and right battery
retainers
5. Full width, raise, lower, horn,
and end mounted reversing
button in control handle
6. Third speed cutout
7. 175 amp battery connector
(PW 3520-60/80)
350 amp battery connector
(PW 3510-60)
8. Key switch
9. Horn
Model PW 3510-60 PW 3520-60 PW 3520-80
Drive Tire in 13.5 x 5.5 x 8 (r) 13.5 x 5.5 x 8 (r) 13 x 4.5 x 8 (p)
Load Wheels 60" 4 - 3.25 x 3.25 (-10) 4 - 3.25 x 3.25 (-10) 2 - 3.25 x 6.5 (-35)
> 60" 2 - 3.25 x 6.50 (-35) 2 - 3.25 x 6.5 (-35) 2 - 3.25 x 6.5 (-35)
-10 Low rolling resistance, cut/tear resistance. Docks, rough floors, floor debris and traction.
-30 Moderate cut/tear resistance, high capacity. High capacity transport. Not for dock use.
-35 Highest cut/tear resistance offered. Extremely high capacity, low rolling resistance. Docks, rough floors and floor debris.
-40 Combines good cut/tear resistance and very high capacity. Use where nothing else works.
Wheels and Tires
(r) = rubber, (p) = poly, = less than or equal to, > = greater than
General Info
DimensionsPerformance
Forks
PW 3500 Series
Technical Information