Filter
Top Products
FEATURES AND EQUIPMENT
TECHNICAL DATA
SPECIAL FEATURES
• The Komatsu SAA6D102E-1 diesel
industrial engine delivers exceptional
power, emission control, and reliable
operation for enhanced productivity and
fuel effi ciency.
• Full fl oating operator compartment (HSC)
greatly reduces operator fatigue by
isolating the compartment from engine
and traveling vibrations.
• Wide slip resistant steps and assist hand
grip makes entry and exit easier.
• Dash display provides easy to read
information to the operator and
maintenance personnel.
ENGINE
SAA6D107E-1 diesel, 6.7 liter turbo-charged
engine adopts the latest engine technologies,
and dramatically reduces NOx and PM in
exhaust. Also, each system usefully interacts
for better fuel effi ciency and lower noise
levels. Reliable fuel fi lters keep system
performance high and protect components.
The engine offers full performance and power
even in severe conditions.
• Electronic Control System
The center control unit quickly processes
signals from various sensors on the vehicle
in order to produce a maximum power in
any condition, eliminating possible loss of
engine performance.
• Heavy duty High Pressure Common Rail
(HPCR) System High pressure compressed
fuel stored in an accumulator chamber
(common rail) is injected into each cylinder
suffi ciently at a proper timing be an
electronic controlled unit (ECU). This
HPCR system promises optimized fuel
burning and reduced fuel consumption.
• Piston Head Combustion System
A unique shape of the combustion
chamber on the top surface of each
piston facilitates complete fuel burning
by optimizing conditions, timings and
amounts of fuel injection, which helps
reduce NOx and PM in exhaust, as well as
fuel consumption.
• Air to Air Charge Air Cooling System
This system cools high temperature air
blown be the turbocharger and supplies
into the cylinders. As a result, the system
maximizes combustion effi ciency and
emission performance, facilitating high
output while reducing NOx and
fuel consumption.
FUEL SYSTEM
Diesel fuel system.
• Large capacity (68.7-74 gal) Integral diesel
fuel tank reduces fueling frequency and
enables extended non-stop operation.
• Easy to see inspection window mounted
on the fuel tank permits reliable checking
of fuel levels.
ELECTRICAL SYSTEM
Standard operator conveniences that are
optional on most, such as a complete light
package, horn and hour meter, are standard
on Hamech.
• 12-volt electrical system.
• Warning lights for engine oil pressure,
battery charging, brake fl uid level, ECCS
monitor and operation fault indicator.
• Electrically controlled forward-reverse
lever operates at the touch of a fi nger.
HYDRAULIC SYSTEM
• Large capacity reservoir
• Easy to see inspection window mounted
on the oil tank permits reliable checking
of oil levels as well as the degree of
oil contamination.
FRAME
All welded assembly of heavy gauge steel
with integral fuel tank.
• Mainframe structure includes single thick
steel plate providing rigidity against
twisting caused by static steering,
turning, or uneven road surfaces, thus
achieving excellent vehicle durability and
load handling performance.
TRANSMISSION
The transmission is three speed and is built
to exacting specifi cations. It is specially
designed for use in industrial lift trucks. The
three speed “Powershift” transmission is
also available as an optional automatic with
forward / reverse lever.
BRAKES
Hydraulic assisted service brakes with master
cylinder booster are self-adjusting and
self-centering.
• High friction, large diameter brake linings
are housed in the drive axle.
• Enlarged brake covers prevent dirt and
water from entering the linings.
• Mechanical parking brake is actuated from
adjustable toggle handle on dash allowing
for more legroom in the operator’s
compartment.
• Optional wet disc braking system
MAST, CARRIAGE, LBR & FORKS
High-visibility mast assembly with 4-roller
carriage available in 2-Stage Free-View type.
• Sealed bearings for reduced
maintenance on carriage.
• Equipped with pin type IV carriage
and forks
• Single and double function external
hosing is available for operating
attachments.
STANDARD EQUIPMENT
• Dash Display – Fuel, Water Temperature,
Torque Converter oil temperature and
Hour Meter Gauges
• Drawbar Pin
• Electronic Ignition; Anti-Restart
Ignition Switch
• Engine Oil Pressure and Charge
Warning Lamps
• Fully Hydrostatic Power Steering
• Headlights
• Horn
• Deluxe full suspension vinyl seat and
Operator Restraint System with Lap Belts
• Overhead Guard
• Sedimeter warning light (Diesel Units)
• Tilting Steering Column
• Torque Converter Oil Cooler
• Turn Signal, Back-up, Stop and Tail Lights
OPTIONAL EQUIPMENT
• Warning Devices – Audible
• Warning Devices – Visual
• Rear View Mirrors
• Wet disc brakes
• Additional Length Forks
• Attachments
• Auxiliary Hydraulic Valve
• External Hydraulic Hosing