Crown Equipment MEX50 Automobile User Manual


 
MEX50 PNEUMATIC TIRE LIFT TRUCK SPECIFICATIONS
GENERAL D100-8 D115-8 D135-8
1 Power Type Diesel Diesel Diesel
2 Operation Type Sit-Down Sit-Down Sit-Down
3 Rated Capacity* lbs. (kg) 22,000 (10000) 25,000 (11500) 30,000 (13500)
4 Rated Load Center in. (mm) 24 (600) 24 (600) 24 (600)
5 Load Distance (Front Axle Center to Fork Face) in. (mm) 27.4 (695) 28.1 (715) 29.1 (740)
6 Wheelbase in. (mm) 110.2 (2800) 110.2 (2800) 122.0 (3100)
WEIGHT
7 Service Weight lbs. (kg) 28,620 (12980) 31,660 (14360) 34,130 (15480)
8
Axle Loading
Loaded Front lbs. (kg) 45,990 (20860) 51,790 (23490) 58,310 (36450)
Rear lbs. (kg) 4,670 (2120) 5,220 (2370) 5,580 (2530)
Unloaded Front lbs. (kg) 13,730 (6230) 14,530 (6590) 15,670 (7110)
Rear lbs. (kg) 14,880 (6750) 17,130 (7770) 18,450 (8370)
TIRES
9 Tire Type Pneumatic Pneumatic Pneumatic
10
Tire Size Front 9.00-20-14PR (I) 10.00-20-14PR (I) 11.00-20-14PR (I)
Rear 9.00-20-14PR (I) 10.00-20-14PR (I) 11.00-20-14PR (I)
11 Number of Wheel - Front/Rear (x=driven) 4x/2 4x/2 4x/2
12
Tread,
(center of tires)
Front in. (mm) 66.9 (1700) 66.9 (1700) 69.7 (1770)
Rear in. (mm) 74.8 (1900) 74.4 (1890) 74.4 (1890)
DIMENSIONS
13 Tilting Angle (Forward/Backward) degree 6/12 6/12 6/12
14 Mast Height, Lowered with Std. Mast in. (mm) 113.8 (2890) 124.4 (3160) 124.8 (3170)
15 Std. Free Lift with Std. Mast from Ground in. (mm) 0.0 (0) 0.0 (0) 0.0 (0)
16 Maximum Fork Height** in. (mm) 118 (3000) 118 (3000) 118 (3000)
17 Mast Height, Extended with Std. Mast in. (mm) 173.2 (4400) 183.9 (4670) 184.3 (4680)
18 Height, Overhead Guard in. (mm) 109.4 (2780) 110.2 (2800) 110.6 (2810)
19 Length, with Std. Forks in. (mm) 215.2 (5465) 216.7 (5505) 230.7 (5860)
20 Length, to fork face in. (mm) 167.1 (4245) 168.7 (4285) 182.7 (4640)
21 Width, at tire in. (mm) 89.8 (2280) 90.9 (2310) 94.9 (2410)
22 Forks (Thickness x Width x Length) in. (mm) 3.0x6.7x48.0 (75x170x1220) 3.0x7.3x48.0 (75x185x1220) 3.1x7.3x48.0 (80x185x1220)
23 Fork Carriage Class Pin Mount Pin Mount Pin Mount
24 Width, Fork Carriageb3 in. (mm) 84.3 (2140) 84.3 (2140) 86.6 (2200)
25
Gr
ound Clearance Under the Mast in. (mm) 9.8 (250) 9.8 (250) 10.2 (260)
at the center of wheelbase in. (mm) 12.8 (325) 13.6 (345) 13.8 (350)
26 Right Angle Stacking Aisle plus load length † in. (mm) 240.7 (6115) 241.9 (6145) 254.3 (6460)
27 Turning Radius in. (mm) 157.5 (4000) 157.9 (4010) 169.3 (4300)
PERFORMANCE
28
Travel Speed
(FWD)
Loaded, 1st/2nd/3rd mph (km/h) 5.3/11.2/17.4 (8.5/18/28) 5.3/11.8/17.4 (8.5/19/28) 5.6/12.1/17.1 (9/19.5/27.5)
Unloaded, 1st/2nd/3rd mph (km/h) 5.6/12.4/19.9 (9/20/32) 5.6/13.0/19.9 (9/21/32) 5.9/13.0/20.2 (9.5/21/32)
29 Lifting Speed (Loaded/Unloaded) fpm (mm/s) 93/98 (470/500) 85/89 (430/450) 69/74 (350/375)
30 Lowering Speed (Loaded/Unloaded) fpm (mm/s) 78.7/98.4 (400/500) 78.7/98.4 (400/500) 78.7/98.4 (400/500)
31 Max. Drawbar Pull (Loaded) lbs. (kN) 23,800 (105) 23,300 (103) 22,700 (101)
32 Max. Gradeability (Loaded 1.5km/h, 3min rating) % 38 32 27
33 Service Brake (Operation/Control) Foot/Hydraulic, Powered Foot/Hydraulic, Powered Foot/Hydraulic, Powered
34 Parking Brake (Operation/Control) Hand/Mechanical Hand/Mechanical Hand/Mechanical
35 Steering (Type) Hydraulic Power Steering Hydraulic Power Steering Hydraulic Power Steering
DRIVE
36 Make/Model Komatsu SAA6D107E-1 Komatsu SAA6D107E-1 Komatsu SAA6D107E-1
37 Rated Output, SAE net HP (kW) 164 (122) 164 (122) 164 (122)
38 Rated Speed min-1 2200 2200 2200
39 Max Torque, SAE net lb.- ft. (N-m) @ min-1 424 (575)@1600 424 (575)@1600 424 (575)@1600
40 No. of Cylinder/Displacement cu.in (cm
3
) 6/408 (6690) 6/408 (6690) 6/408 (6690)
OTHER
41 Fuel Tank Capacity US gal (Ltr) 68.7 (260) 68.7 (260) 74.0 (280)
42 Relief Pressure for Attachment psi (bar) 3,118 (215) 3,118 (215) 3,118 (215)
43 Hydraulic Tank Capacity US gal (Ltr) 48 (180) 48 (180) 55 (210)
44 Clutch Torque Converter Torque Converter Torque Converter
45 Battery (Voltage/Capacity at 5-hour rating) V/Ah 24/80 24/80 24/80
NOTE: Most values shown in this publication are rounded. Therefore, direct conversion between metric and English or Imperial may be slightly different from those
shown. The performance of machines is affected by the condition of the truck and how it is equipped, as well as the nature and condition of the operating area.
If these specifi cations are critical or if your needs exceed the specifi cations shown here, discuss the proposed application with your authorized dealer.
*Optional masts, attachments, longer load dimensions, and higher lifting heights may result in downrating of the capacity. Contact your authorized dealer.
**Other mast heights available. See MAST DATA chart for other standard mast heights. Contact your authorized dealer.
†Add load distance and clearance. Contact your authorized dealer.