Filter
Top Products
Travel,
power unit
first
Know the Hazards
WHEN USING COAST
•Travel power unit first only.
•Don't get in the path of the truck.
•Watch your feet.
•Stay to the side of the truck. Keep your
arm extended to give maximum clearance
between you and the truck.
USING COAST REQUIRES EVEN MORE CAUTION
• Automatic braking is disabled when Coast is activated.
Handle must be manually moved to a brake position.
• Floors must be level and free of obstacles.
• Never allow the truck to coast into a cross aisle.
• Do not use coast in pedestrian walkways.
• Watch out for people and other trucks.
• Do not walk in the path of a coasting truck. Stay to the
side of the truck with your arm extended and keep your
feet clear.
• Use coast while traveling power unit first only.
• Always turn coast off when you finish a coast operation,
or whenever you leave your vehicle.
• For QuickCoast equipped trucks, when you turn coast
off or turn the truck off, make certain your body is not
in the path of the control handle as it returns to vertical.
Recommended
Walking Area
Coast Controls optional (continued)
21 Coast Controls optional (continued)
Move control handle to
brake position to stop truck.
Truck will coast
if handle stays in drive
position when released.
Know the Hazards
USE THE QUICKPICK WALKALONG CONTROL CAREFULLY
• Don't let the truck speed exceed your walking speed.
• Limit use of the QuickPick controls to moving the truck
between picks in clear aisles.
• Use the twist grips if you need better control of travel
speed or steering.
QuickPick
™
Walkalong Control optional 22
QuickPick
™
Walkalong Control optional
QUICKPICK
TM
WALKALONG CONTROL OPTION
You can use this option, usually along with the
coast option (see pages 19, 20 & 21), to make it even
easier to pick loads.
Use these options when picking items located
close to each other in an aisle, usually within
4 bays or about 11 meters (36 feet).
QUICKPICK WALKALONG CONTROL BUTTONS
You can use the QuickPick controls from either
side of the truck. Place your hand on the end of the
control handle closest to you. Press both buttons at
the same time.
Your truck will travel power unit first at the maximum
walkie speed. You have only one travel speed while
using the QuickPick option.
You can control travel speed by releasing and pressing
the control buttons occasionally.
Use the twist grips anytime you need better control of
travel speed or steering.