Filter
Top Products
Remote Coding / Programming Routine(s) Remote Coding / Programming Routine(s)
IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any
operations. All remotes must be coded at the same time.
IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any
operations. All remotes must be coded at the same time.
Programming Your RemotesProgramming Your Remotes
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the
Acc & On positions) five times within 7 seconds. The vehicle’s parking lights will flash once with the
successful completion of this step.
STEP 2: Within a 5 second period after cycling the ignition for the 5
th
time, press button (I) on two-way
remotes or the Lock button on one-way remotes for 0.5 seconds. The parking lights will flash once to
confirm the transmitter has been coded.
Exiting Programming: Programming is a timed sequence. The parking
lights will flash twice signaling the end of programming mode.
Programming Multiple Remotes: After the confirmation flash given in
step 2, code additional remotes by pressing button (I) on two-way
remotes or the Lock button on one-way remotes. The parking lights
will flash once confirming each additional remote. All systems can
recognize up to three remotes.
12