Filter
Top Products
© 2001 Firstech, Inc. Page 10
Query Function
Query FunctionQuery Function
Query Function
Query Function allows the owner to visually monitor the status of your car by looking
at the remote-pager CompuGlo LCD. Press Button IV for a ½ second to activate the
Query Function.
Reservation Mode
Reservation Mode Reservation Mode
Reservation Mode (
((
(manual transmission
manual transmissionmanual transmission
manual transmission only)
only) only)
only)
In order to auto-start your manual transmission car, you must first set the
CompuStar system to Reservation Mode before leaving your vehicle. The purpose
of Reservation Mode is to leave the transmission gear in the neutral position when
you leave your vehicle. Reservation mode is intended for use in MANUAL
TRANSMISSIONS ONLY and NOT FOR AUTOMATIC TRANSMISSIONS.
Reservation Mode must be engaged each and every time you leave your manual
transmission car in order to auto-start the vehicle.
Note: The system is not recommended for vehicles with removable tops.
Important Requirements to activate Reservation Mode
The transmission must be in the NEUTRAL position.
The vehicle windows must be rolled up.
Do not set the reservation mode with people in the vehicle.
Do not auto-start the car with people in the vehicle.
Activating Reservation Mode (MANUAL TRANSMISSION ONLY)
Step 1: After arriving at your destination, and BEFORE TURNING YOUR ENGINE
OFF, place the transmission in the Neutral position.
Step 2: Remove your foot from the foot brake.
Step 3: Activate the parking brake.
Step 4. Remove the key from the ignition. The engine will remain running.
Step 5. Exit the vehicle and close the door within two minutes from activating the
parking break. The engine will shut off and reservation mode for the remote
starter is now complete.
Your vehicle is now ready for auto-starting. However, the reservation mode will
be cancelled if the door is opened or the CompuStar system is put in Valet mode
after the reservation has been set. Once cancelled, you will have to start the