Code Alarm CA 210 Automobile Alarm User Manual


 
128-6530
2 of 10
Page 2
Your system has many features and available options some of which are
selected at time of installation. Consult your installing dealer for options that
may have been installed and are not listed.
LOCKING THE SYSTEM:
1. Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk.
2. Press and release the LOCK button of your keychain transmitter one time.
The vehicle's doors will lock, the parking lights will flash once, the horn will
honk once, and the dash mounted LED will begin to flash slowly confirming
the system is locked. If the optional starter inhibit feature is installed, the
starter inhibit feature will turn on.
SILENT LOCKING:
1. Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk.
2. Press and hold both LOCK & UNLOCK buttons of your key chain transmitter
for 2 seconds. The parking lights will flash once, and the dash mounted LED
will begin to flash slowly confirming the system is locked. The horn will not
honk. If the optional starter inhibit feature is installed, it will activate.
UNLOCKING THE SYSTEM:
As you approach the vehicle, press and release the UNLOCK button on the
keychain transmitter. The vehicle's doors will unlock, the parking lights will
flash 2 times, the horn will honk 2 times, and the dash mounted LED will turn
off. If the optional starter inhibit feature is installed, the starter inhibit feature
will turn off.
SILENT UNLOCKING:
As you approach the vehicle, press and hold both LOCK & UNLOCK buttons
on your key-chain transmitter for 2 seconds. The parking lights will flash 2
times, and the dash mounted LED will turn off confirming that the system is
unlocked. The horn will not honk. If the optional starter inhibit feature is
installed, it will deactivate.