Filter
Top Products
Nothing Comes Close to a Cobra
®
19
Settings
Intro Operation Customer
Assistance
Warranty
Notice
S
econdary Icons
Your Detector
18
English
Pop Alert
Pop Alert will alert you of Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect off.
K, Ku and X Band Detection
The new Ku Band may be introduced to North America in the future. To prevent
false alerts until it is, the factory default for
Ku Band detection is off. In parts of
North America, annoying false alerts from door openers and similar devices are
triggered on the
X Band and K Band. If desired, X Band or K Band can be turned
off. The factory default for
X Band and K Band detection is on.
To Turn Pop Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Pop Detect.
Tone Visual Display Voice
Two beeps Pop On Pop On
One beep Pop Off Pop Off
Pop Detect On
Pop On
Pop Detect Off
Pop Off
Settings
Intro Operation Customer
Assistance
Warranty
Notice
S
econdary Icons
Your Detector
NOTE
If you do not press the Set/City button within two minutes after beginning
the set compass process, compass calibration will automatically terminate.
Intro Operation Customer
Assistance
Warranty
Notice
i
n Icons
condary Icons
To Calibrate the Compass Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, go to
Set Compass.
Tone
Visual Display Voice
None Set Compass None
Press and release the Set/City button
to begin setting the compass.
One (1) beep Drive in 2
circles…
Press SET
when done…
Set Compass
Within two minutes, drive your
vehicle in a circle twice, then press
the Set/City button again.
Three beeps Compass Set!
For two
seconds
followed by
direction of
travel (N, NE,
E, SE, S, SW,
W or NW)
Compass Set
Press and release either the Select/Dim
button to proceed to the next user
mode or the Program/Mute button
to exit Program mode.
None None None
Set Compass
Set Compa...
Calibrate
Compass
Drive in...
Compass Set
Compass
Press SET... Set!
Direction
of Travel
N W h
Tone Visual Display Voice
One beep Compass not set…
Please try again…
Compass not set…
Please try again…
Compass n...
Please tr...
Terminate
Program/Mute Button
Select/Dim Button
Set/City Button
To Turn X, K and/or Ku Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to X, K or Ku band.
Tone Visual Display Voice
Two beeps X-Band On X On
One beep X-Band Off X Off
Two beeps K-Band On K On
One beep K-Band Off K Off
Two beeps Ku-Band On Ku On
One beep Ku-Band Off Ku Off
X-Band On
Ku-Band On
X-Band On
Ku-Band On
Ku-Band Off
Ku-Band Off
X-Band Off
X-Band Off
K-Band On
K-Band On
K-Band Off
K-Band Off