Filter
Top Products
ᕡ Press and release Mute button to turn off
the audio during an alert.The alarm will be
turned off until the signal is over with audio set
at previous volume level for next signal.Pressing
Mute button again will turn alarm back on.
Operation
13
Operation
12
Muting
Audio Muting
The Mute button is used to temporarily turn off
the alarm and control Auto Mute mode.
Note
To completely turn off
incoming alerts while in
auto mode,press and
release mute button.
Note
In either mode the next
alarm will begin with
normal volume.The
XR-1050 will retain the
chosen mode while OFF.
Note
Mute=“Beep”
OR
Auto Mute=“Beep-Beep”
PRESS &
RELEASE
Manual Muting
Press this button to turn off the audio alarm.
Highway/City Mode
To select Highway Mode:
Press and release City button.HWY will be
displayed.A double beep confirms Highway mode.
H
W
Y
ᕡ Press and release City button and CITY will be
displayed.A single beep confirms City mode.
Highway/City Mode
To select City Mode:
The Highway/City function is controlled by a
2-step button.
Highway/City
Mode
Note
Use City Mode in or near
cities where there are many
sources of false X-band
radar signals such as
microwave relay towers
and automatic door
openers.This will filter out
weak signals.
Note
The unit will announce
“Highway” or”City” in Voice
Mode.
C
I
T
Y
PRESS &
RELEASE
C
I
T
Y