Filter
Top Products
8
Operation
9
Turning
On Your
XR-1010
Turning On Your XR-1010
Plug power cord into
detector.
Plug power cord into
cigarette lighter.
2
3
Press the Power Button.
1
In Tone and Voice modes,the unit will announce
“Testing”and the display will show four typical
alerts – X,L(Laser),V(VG2),W(Emergency Vehicle) and
announce “System Ready”.The system indicates if
Voice Alert™ or Tone only mode has been selected and
if VG2 audio alert is turned on or off.
X
L V W
L
A
Z
E
R
E
Y
E
B
A
N
D
L
A
Z
E
R
E
Y
E
Operation
Set Volume
Adjust the volume up or down using the volume
rocker switch on side of unit.
+
-
The volume control has 8 volume settings,
levels 0-8.As the level is increased, “Voice
Alert™”or the beep tone will allow you to hear
the volume level.At level 8 a “beep beep”is
heard indicating maximum volume. When the
volume is turned to “0”,(off) you will not hear a
beep, but the (power) will blink.
Note
Pressing the volume up
button while you turn on
unit will show all 10 Alerts
with their Tones.