Cobra Electronics XR-1010 Radar Detector User Manual


 
Detection
17
Detection
16
X, K and Ka Bands
The display will show illumination of the band
received (X,K or Ka).The signal strength will be
indicated by signal strength LED’s which
increase in size as you approach the radar gun.
Distinct tones will also be generated for each band.
VG-2 Alert
®
Note
The display does not
indicate signal strength.
Note
Operation of the VG-2 Audio
Alert may be selected by the
user. The factory setting is in
the “on” position.
X, K, Ka Alert VG-2 Alert
®
VG-2 Undetectable
The Cobra® XR-1010 is undetectable by police VG-2
detection devices.It will alert you when one is in
use near your vehicle.During this time,the unit is
still on full alert and able to detect other signals.
VG-2 Audio Alert
To turn VG-2 Audio Alert “off”,press and hold the Dim
Button for 2 seconds.The Radar Detector will beep once
indicating the VG-2 Audio Alert has been disabled.
To turn the VG-2 Audio Alert “on”press and hold
the Dim Button for 2 seconds.The Radar Detector
will beep twice indicating the VG-2 Audio Alert has
been activated.
V
Cty
X
Cty
K Ka
Von the front of the unit will be displayed.
In Voice Alert™, the
message “Be careful—VG-
2 alert”will be announced
according to the band
given,followed by tones
until the alert is over.
Safety Alert
®
TrafficWarning
System and
360º Strobe
Alert™
Safety Alert® Traffic Warning System
and Strobe Alert
Safety Alert® Traffic Warning System and Strobe
Alert™ will alert you with the following warnings:
Emergency Vehicle, Road Hazard and Train.
Strobe Alert™ will be indicated by a blinking W
and Emergency Vehicle tone.
Safety Alert® will detect Road Hazards,Trains and
Emergency Vehicles.Display will show an
illuminated W with separate distinct tones for
Emergency Vehicle, Road Hazard and Train.
W
Cty
W
Cty
Strobe Alert
Safety Alert®
PRESS &
HOLD