Cobra Electronics ESD 9560 Radar Detector User Manual


 
4
DETECTION
17
4
DETECTION
16
* your ESD-9560 provides LaserEye
®
360° detection of these signals
PLEASE NOTE: Beep rate changes with different laser alerts
PLEASE NOTE: There are different tones for each Safety Alert
®
Laser*
Strobe Alert™*
Emergency Vehicle
Type of Signal Visual Display
Type of Signal
3M Opticom™ or Tomar
®
V
Visual Display
Emergency Vehicle...
(flashing)
Radar
Type of Signal
X band radar
K band radar
Ka band radar
Visual Display
X
K
Ka
Laser
20/20…
Laser
UltraLyte…
Laser
Pro Laser…
Laser
Pro Laser 3…
LTI 20-20™*
LTI Ultra-Lyte™*
Kustom Signals ProLaser™*
Kustom Signals ProLaser III™*
Laser
Laser
Laser
20/20...
UltraLyte...
Pro Laser...
Laser
Pro Laser 3...
Ka 5
K 5
X 5
Signals Detected
The tables on the following pages show
you the types of signals your ESD-9560
will detect, as well as the voice and
visual alerts it provides for each one.
Audio Alerts
A distinctly different alert tone is used for
each type of signal detected (including
separate tones for each laser signal). For X,
K, and Ka band radar signals, the tones will
repeat faster as you approach the signal
source. The repeat rate of the tones gives
you useful information about the signal
detected. (See Responding to Alerts,
page 19.)
Visual Display
An indication of the type of signal
detected will appear in the DigiView™
Data Display. During X, K, and Ka alerts,
you will also see from 1 to 5 vertical bars,
indicating the strength of the signal
detected.
Weakest
Signal
1
2
3
4
5
Strongest
Signal
SIGNAL STRENGTH CHART