Cobra Electronics ESD 9290 Radar Detector User Manual


 
English
8
Settings
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Nothing Comes Close to a Cobra
®
9
Settings
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Data Display Brightness
You can choose from three settings for
Brightness of the display. Repeatedly push
the Dim button to cycle through the settings.
In Dark mode the power LED will blink
slowly to indicate that power is On.
The factory setting is Bright.
Voice/Tone Setting
You can set your detector to sound alerts with either a Voice or a Tone. You
can change settings by using the Mute button.
In Voice Alert mode, you will rst hear several tones, then a voice message
announcing the type of signal detected, followed by more tones. In Tone
Alert mode, you will hear the tones only. The factory setting is Voice Alert
mode.
VG-2 Alert Settings
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from VG-2 RDDs and can provide alerts
when any of these or similar devices are in use near your vehicle.
Your detector is invisible to VG-2 RDDs. You can choose whether you want to
be alerted to VG-2 RDD signals. The factory setting for VG-2 alert is Off.
Mute Button
Press and hold
for two seconds
To Change From Tone Alert Back to Voice Alert
While no signal
is being detected,
press and hold
the Mute button
for two seconds
again.
Tone Mode Voice Mode Visual Display
None Voice Alert Audio Only
To Change From Voice Alert to Tone Alert
While no signal
is being detected,
press and hold
the Mute button
for two seconds.
Tone Mode Voice Mode Visual Display
One beep Tone Alert Audio Only
Dim Button
Press and hold
for four seconds
To Turn VG-2 Alerts On and Off
While no signal
is being detected,
press and hold the
Dim button for
four seconds.
Tone Mode Voice Mode Visual Display
On = One beep VG-2 On V/S LED Flashes Once
Off = Two beeps VG-2 Off V/S LED Flashes Twice
Press and
release
Dim Button
Bright
Dim
Dark
ESD9290_MANL.indd 8-9 12/15/09 3:01 PM