Filter
Top Products
17
3
OPERATION•SETTINGS
16
3
OPERATION•SETTINGS
Pop Alert
Pop Alert will alert you of Ka band Pop
signals. During the alert, the unit continues
to detect other signals.
When you turn Pop Ka Detect mode on or
off you will hear 2 beeps for Pop detection
on or 1 beep for Pop detection off. (See
page 7 for instructions on using the
Program mode to turn Pop Ka Detect mode
on and off.)
The factory setting is Pop Ka Detect off.
VG-2 Alert
The detector is undetectable by police VG-2
detection devices and will alert you when
such a device is in use near your vehicle.
During the alert, the unit continues to detect
other signals. You can choose whether or
not you want your unit to show VG-2 alerts.
With VG-2 Detect mode on, you can also
choose whether or not you want your unit
to sound audible VG-2 alerts.
When you turn VG-2 Detect mode on or off
you will hear 2 beeps for VG-2 detection on
or 1 beep for VG-2 detection off. (See page
7 for instructions on using the Program
mode to turn VG-2 alerts on and off.)
When you turn VG-2 Detect Audio mode on
or off you will hear 2 beeps for VG-2 audio
on or 1 beep for VG-2 audio off. (See page
7 for instructions on using the Program
mode to turn VG-2 audio on and off.)
The factory settings are VG-2 Detect on,
VG-2 Detect Audio on.
Spectre Alert
The detector is undetectable by police Spectre
detection devices and will alert you when
such a device is in use near your vehicle.
During the alert, the unit continues to detect
other signals. You can choose whether or not
you want your unit to show Spectre alerts.
With Spectre Detect mode on, you can also
choose whether or not you want your unit to
sound audible Spectre alerts.
When you turn Spectre Detect mode on or
off you will hear 2 beeps for Spectre
detection on or 1 beep for Spectre detection
off. (See page 7 for instructions on using
the Program mode to turn Spectre alerts on
and off.)
When you turn Spectre Detect Audio mode on
or off you will hear 2 beeps for Spectre audio
on or 1 beep for Spectre audio off. (See page
7 for instructions on using the Program mode
to turn Spectre audio on and off.)
The factory settings are Spectre Detect on,
Spectre Detect Audio on.
SmartPower
Your detector includes the SmartPower
feature that, when activated, will put the
unit into standby mode (low power) for
about 30 minutes after the car’s engine has
been turned off. After 30 minutes in standby
mode, the unit will automatically turn off.
To return the unit to normal power mode or
exit standby mode, start the car, press any
button or turn the unit off and then on again.
When you turn SmartPower mode on or off
you will hear 2 beeps for SmartPower on or
1 beep for SmartPower off. (See page 7 for
instructions on using the Program mode to
turn SmartPower mode on or off.)
Before SmartPower enters standby mode,
you will hear 1 beep and “Pwr Save”
will appear in the display. Press any button
to exit standby mode or return to normal
power mode.
The factory setting is SmartPower on.
Pwr
Save