Cobra Electronics 2000 GPS Receiver User Manual


 
34
At the
Address menu B:
1. Scroll
or
to [State] and press ENTER.
2. At the
Select State menu E, scroll
or
to the desired state name and press ENTER.
The state will be accepted and the system will return to the
Address menu B with the state filled in.
At the
Address menu B, with the state name filled in:
1. Scroll
or
to [City] and press ENTER.
2. At the
Select City menu F, scroll
or
to the desired city and press ENTER.
3. At the
Address menu B, scroll
or
to [Street] and press ENTER.
4. At the
Select Street Name menu G, scroll
or
to the desired street and press ENTER.
5. At the
Address menu B, press ENTER to proceed to the
Enter Address Number menu H or
press the INTERSECTION function button, then ENTER to proceed to the
Select Cross Street menu I.
6. At either the
Enter Address Number menu H or the
Select Cross Street menu I, enter the street number
using spell mode at the
Enter Address Number menu H or scroll
or
to the desired cross street at
the
Select Cross Street menu I and press ENTER.
The address will be accepted and the system will return to the
Address or
Intersection menu B or C.
The entire address or intersection will be filled in, ready to be used for navigation to that destination.
Start address
. . . . . . . . .
entry with state
Finish
. . . . . . . . . . . . . . . .
address entry
NOTE
If zip code was used to start
the address entry and the city
bar is filled in, skip steps 1 to 2.
08 B Add/Intr 6/15/04 5:30 PM Page 34