Filter
Top Products
Feature
Factory
setting
# of
flicks &
chirps
Secondary
action
Program
completion
confirmation
Result
Add a New
Remote to
Channel 1
(arm/disarm)
—
13
Press remote control button I
1 chirp
Button I/channel 1 code of
new remote control has
been memorized
Add a New
Remote to
Channel 2
(optional re-
mote
accessory)
—
14
Press remote control button II
2 chirps
Button II/channel 2 code of
new remote control
has been memorized
Add a New
Remote to
Channel 3 (si-
lent arm/dis-
arm)
—
15
Press remote control buttons I+II
(or button III of the optional
4-channel remote control)
3 chirps
Button I+II/channel 3 code
of new remote control
has been memorized
Add a New
Remote to
Channel 4
(optional
remote
accessory)
—
16
Press remote control button IV
of the optional
4-channel remote control
4 chirps
Button IV/channel 4 code
of new remote control
has been memorized
User-Programmable Remote Controls
Eagle will respond to as many as four remote controls regardless of each remote
control’s individual digital coding. Thus, you can buy additional remote controls,
including the super-high-security 4.3-billion-code Premier™ remote controls,
from any Authorized Clifford Dealer. To add a new remote control to the system,
use the procedures noted in the User-Selectable Features section on pages 6-7.
To Erase Unwanted Remote Control Codes
If your remote control is ever lost or stolen, you can erase its digital codes from
the system memory to make sure that the missing remote control can never be
used to disarm your system. Just use the Add a New Remote procedures noted in
the User-Selectable Features section on pages 6-7 for a total of four times (e.g., if
you have one remote control remaining, program it four times; if you have two
remote controls, program each twice).
© Copyright Clifford Electronics, Inc., 1993 31-074A/193/XL1OM