Filter
Top Products
39
© 2011 Directed Electronics. All rights reserved.
Feature Details
Remote Start Features
Pit Stop Mode
To exit vehicle with engine running
The system keeps the engine running during short trips into the house
or convenience store. To perform Pit Stop:
1. With the engine running, set the parking brake and release the
foot brake.
2. Press the
button, the vehicle lights will turn on and the remote
will play the
REMOTE START ACTIVATED
message.
3. Turn the key to off, and remove it from the ignition, the engine
continues running for the programmed runtime.
4. Exit the vehicle and arm the alarm.
Note
For Pit Stop on manual transmission vehicles, follow the di-
rections in the Manual Transmission Start (MTS mode) sec-
tion found further into Remote Start Features.
Key Takeover
When you are ready to drive
The system keeps the engine running until the vehicle is ready to be
driven. To perform Driver Takeover:
1. Disarm the system and enter the vehicle, do not step on the foot
brake.
2. Insert the key, turn it to the run position, and then step on the foot
brake, the remote start then turns off.