Filter
Top Products
13
© 2011 Directed Electronics. All rights reserved.
Commands
Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the siren chirps
and lights flash twice. The
DISARM
animation and beeps play to con-
firm. If Valet mode* is On the doors unlock and the
UNLOCK (IN VALET)
animation and tone play.
More than 2 siren chirps and remote beeps indicates a trigger has
occurred. The Disarm animation is then replaced by the Alarm Trigger
report.**
Remote Start
Press and release
Activates (or if On, deactivates) the remote starter. The engine and lights
turn On and the
REMOTE START ACTIVATED
animation and On tones play,
or the engine and lights turn Off and the
REMOTE START DEACTIVATED
animation and Off tones play to confirm. The Remote Start status icons
in the Status screen are updated accordingly. If Remote Start fails to
activate, a fault screen and tone plays to identify the reason.***
* See “Remote and System Operations” on page 45 for details.
** See “Alarm Features” on page 35 for details.
*** See “Remote Start Not Available” on page 44.
For Manual transmission vehicles see the “Manual Transmission Start (MTS
mode)” on page 42 for more details.