Filter
Top Products
34
© 2005 directed electronics, inc.
ccooddee hhooppppiinngg
The receiver and remotes use a mathematical formula called an
algorithm to change their code each time the remote is used.
This technology has been developed to increase the security of
the unit. The control unit knows what the next codes should be.
This helps to keep the remote “in sync” with the control unit
even if you use the remote control out of range of the vehicle.
However, if the remote has been pressed many times out of range
of the vehicle, or the battery has been removed, it may fall out of
sync with the control unit and fail to operate the system. To re-
sync the remote simply press several times within range of
the vehicle. The alarm will automatically re-sync and respond to
the remote normally.
note: Your system stores the last two triggered zones in
memory. If your system has been triggered but the LED
has been reset by turning on the ignition, your dealer can
still recall the last two zones that were triggered. Contact
your dealer for details.