Clarion S100 Automobile Alarm User Manual


 
26
until the system is disarmed. If the door is opened or the ignition is
turned off and on in an attempt to restart the car, the siren and light
flashing will begin again.
disarming the anti-carjacking system
Take the time to familiarize yourself with the anti-carjacking triggering
sequence and the disarm procedure. It is important to recognize and
identify the trigger sequence and know how to disarm it in case of ac-
cidental activation.
Once the anti-carjacking system is armed, it does not disarm automat-
ically. You must disarm it the next time you operate the vehicle. You
must disarm it with one of the following procedures:
If the system has not entered the triggered sequence (siren has not
started chirping):
1. Turn the ignition on.
2. Press on the remote for one second. The lights
will flash and the siren will chirp twice.
If the system has entered the triggered sequence (siren has begun
chirping), pressing the disarm button of the remote will not disarm the
Anti-Carjacking System. To disarm the system during an Anti-
Carjacking System trigger sequence:
1. Turn the ignition on.
2. Press the Override switch the pre-pro-
grammed number of times to disarm the
Anti-Carjacking System.
DRW-35