Filter
Top Products
7
3.5 Tamper Alert
On Disarming, if the system responds with three chirps, indicating the system was
triggered, turn on the ignition and the LED will flash the triggered zone 5 cycles.
LED Flashes (60 seconds):
1 flash = optional sensor
2 flashes = shock sensor
4 flashes = door
5 flashes = trunk
example: flash-flash-pause-flash-flash-pause = shock sensor
3.6 Silent Arming / Disarming (Programmable feature)
As an option, the system can be programmed to always Arm and Disarm the with
or without chirp confirmation (see User Accessible Programming Options).
To temporarily cancel the Arming and Disarming confirmation chirps, press the
Level Shift Button followed by the Arm or Disarm Button.
Note: The confirmation chirps will only be cancelled if the system status is normal.
The chirp indications for Tamper Alert and the open zone warning will not be
cancelled when the system is Armed or Disarmed silently.
3.7 Optional Driver's Door Priority Unlock
The optional Driver’s Door Priority Unlock feature provides a higher level of
personal safety by unlocking only the driver’s door upon disarming. Once
disarmed, pressing the disarm button again will unlock all doors. This optional
feature may require addtional parts and labor, consult your Authorized Ungo dealer
for more information.
3.8 Auto Rearm Feature (Programmable feature)
The Auto Rearm feature allows the system to automatically rearm itself in the event
the system becomes disarmed and a door is not opened within 30 seconds. This
option is user programmable (see User Selectable Programming Options).
3.9 Ignition Controlled Door Locks (Programmable feature)
The ignition door-locking feature allows the doors to automatically lock when the
ignition is turned On, and automatically Unlock when the ignition is turned Off.This
option is user programmable (see User Selectable Programming Options).
MS2106 owner 7-14.qxd 7/14/2003 1:42 PM Page 7