•
AIRBAG Readiness Light
•
Driver Airbag
•
Passenger Airbag
•
Steering Wheel and Column
•
Instrument Panel
•
Interconnecting Wiring
•
Knee Impact Bolsters
The window airbag system, on vehicles so equipped,
consists of the following:
•
Airbag Control Module
•
AIRBAG Readiness Light
•
Left and Right Window Bags Above Side Windows
•
Left and Right Side Impact Sensors
•
Interconnection Wiring
How The Airbag System Work
•
The airbag control module determines if a frontal
collision is severe enough to require the airbags to
inflate. The control module receives the level of colli-
sion severity, determines the proper level of airbag to
be deployed. The frontal airbag inflators are designed
to provide three different rates of air bag inflation.
•
The airbag control module will not detect rollover or
rear collisions.
•
The airbag control module also monitors the readiness
of the electronic parts of the system whenever the
ignition switch is in the START or RUN positions.
These include all of the items listed above except the
knee bolster, the instrument panel, and the steering
wheel and column. If the key is in the “off” position, in
the ACC position, or not in the ignition, the airbags are
not on and will not inflate.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35
2