Filter
Top Products
6-45
Taillamps
A. Turn Signal Lamp
B. Back-up Lamp
C. Stoplamp
1. Use a tool to remove the
two screws from the
lamp assembly.
2. Remove the lamp assembly.
3. Press the release tab and turn the bulb
socket counterclockwise to remove it from
the taillamp housing.
4. Pull the old bulb straight
out from the socket.
5. Press a new bulb into the socket, insert the socket
into the taillamp housing and turn the socket
clockwise into the taillamp housing until it clicks.
6. Reinstall the rear lamp assembly.