Chevrolet 2009 Suburban Automobile User Manual


 
Do not connect positive (+) to negative ()oryou
will get a short that would damage the battery
and maybe other parts too. And do not connect the
negative () cable to the negative () terminal on
the dead battery because this can cause sparks.
6. Connect the red
positive (+) cable to the
positive (+) terminal of
the vehicle with the
dead battery. Use a
remote positive (+)
terminal if the vehicle
has one.
7. Do not let the other end touch metal. Connect it to
the positive (+) terminal of the good battery. Use a
remote positive (+) terminal if the vehicle has one.
8. Now connect the black negative () cable to the
negative () terminal of the good battery. Use a
remote negative () terminal if the vehicle has one.
Do not let the other end touch anything until the
next step. The other end of the negative () cable
does not go to the dead battery. It goes to a
heavy, unpainted metal engine part or to the remote
negative () terminal on the vehicle with the dead
battery.
9. Connect the other end of the negative () cable to
the remote negative () terminal, on the vehicle with
the dead battery.
5-47