Filter
Top Products
Setting the Clock
AM-FM Radio with Optional CD Player
If your vehicle has an AM/FM radio with an optional
CD player, it has a
H (clock) button for setting the time.
With these types of radios, the clock can be set with
either the radio turned on or off.
Set the time by following these steps:
1. Press the H button until the hour begins flashing
on the display. Press the
H button a second time
and the minutes begin flashing on the display. Press
the
H button a third time and the 12HR or 24HR
time format begins flashing.
2. While either the hour or the minutes are flashing,
turn the
f knob, located on the upper right side of
the radio faceplate, clockwise or counterclockwise
to increase or decrease the time. While the 12HR or
24HR time format is flashing, turn the
f knob
clockwise or counterclockwise to select the default
time settings.
3. Press the
H button again until the clock display
stops flashing to set the currently displayed time;
otherwise, the flashing stops after five seconds and
the current time displayed is automatically set.
MP3 Radio with a Single CD Player
If your vehicle has a radio with a single CD (MP3)
player, the radio has a
H button for setting the time
and date.
To set the time and date, follow the instructions:
1. Press the
H button and the HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year)
displays.
2. Press the pushbutton located under any one of the
labels that you want to change. Every time the
pushbutton is pressed again, the time or the date if
selected, increases by one.
• Another way to increase the time or date, is to
press the right
¨ SEEK arrow or the \
FWD (forward) button.
3. To decrease, press the left
© SEEK arrow or the
s REV (reverse) button. You can also turn the f
knob, located on the upper right side of the radio,
to adjust the selected setting.
3-68