Filter
Top Products
A rear seat passenger can use this control panel to
personally adjust the temperature, the direction of the
airflow and the fan speed for the rear seating area.
The fan knob located on the front climate control panel
must be turned to AUX (Auxiliary) to let a rear seat
passenger use the control panel in the rear seating area.
Performing this action disables the front control panel.
To return control to this panel, move the fan knob out
of AUX.
9 (Fan): Turn the left knob clockwise or
counterclockwise to increase or decrease the fan speed
in the rear-seating area.
9: This position turns the system off.
Mode Control: Turn the center knob clockwise or
counterclockwise to change the direction of the airflow
in the rear seating area.
To change the current mode, select one of the following:
H (Vent): This mode directs air to the upper outlets,
with a little air directed to the floor outlets.
2 (Floor): This mode directs most of the air to the
floor outlets.
Temperature Control: Turn the right knob clockwise or
counterclockwise to increase or decrease the
temperature in the rear-seating area.
The air-conditioning system on the main climate control
panel must be turned on to direct cooled air to the
rear of the vehicle. If it is not on, then the temperature
in the rear of the vehicle remains at cabin temperature.
Be sure to keep the area under the front seats clear
of any objects so that the air inside of your vehicle can
circulate effectively.
For information on how to use the main climate control
system, see Climate Control System on page 3-19.
For information on ventilation, see Outlet Adjustment on
page 3-22.
3-24