Filter
Top Products
Use the flat end of the wheel wrench and pry along the
edge of the cover until it comes off. The edge of the
wheel cover could be sharp, so do not try to remove it
with your bare hands. Do not drop the cover or lay
it face down, as it could become scratched or damaged.
Once you have removed the wheel cover, use the
following procedure to remove the flat tire and install the
spare tire.
1. Turn the wheel wrench
once on each wheel nut
to loosen them. Do not
remove them yet.
2. For all wheel types, find the jacking location using
the diagram above and the corresponding hoisting
notches located in the plastic molding. The
notches in the plastic molding are marked with a
triangle shape to help you find them.
The front location is about 7 inches (17.7 cm) from
the rear edge of the front wheel well. The rear
location is about 8.5 inches (21.6 cm) from the rear
edge of the wheel well.
3. Put the compact spare tire near you.
5-78