Filter
Top Products
After folding the seat cushion fully forward, pull the
seatback forward and fold the seatback down until
it is flat. If the seatback cannot fold flat because
it interferes with the cushion, try moving the front seat
forward and/or bring the front seatback more upright.
On the passenger side of the extended models, the lever
at the base of the seat must be turned rearward to
release the seatback.
To create a load floor release the panels from the
seatback by pushing forward on the latch. Then fold the
panels back to cover the rear seat footwell area.
To return the seat to the passenger position on a
extended model do the following:
1. Lift the floor load panels and latch them into
the seatback.
2. Lift the seatback up and push rearward all
the way.
3. Lower the seat cushion until it latches into position.
4. Pull forward on the seatback and up on the
seat cushion to make sure the seat is securely
in place.
On regular models make sure the head restraints are
returned to the upright position.
1-10