Disarming the System
You can disarm the system by doing any one of the
following:
• Press the remote keyless entry transmitter
unlock button.
• Turn the ignition on.
• Turn the driver’s door key lock cylinder
counterclockwise.
If the system is armed and the trunk is opened using
the trunk release button on the transmitter, the system
will temporarily disarm itself and re-arm when the
trunk has been closed. This allows the you to exit the
vehicle, lock the doors using the transmitter, and
open the trunk using the transmitter without having to
disarm and re-arm the system.
Once the system is disarmed, the security light will
stop flashing.
How the System Alarm is Activated
If the system is armed, it can be activated by either:
• Opening the driver’s door or trunk. This will cause
a ten second pre-alarm chirp followed by a
thirty second full alarm of horn and lights.
• Opening any other door. This will immediately
cause a full alarm of horn and lights for
thirty seconds.
When an alarm event has finished, the system will
re-arm itself automatically.
How to Turn Off the System Alarm
To turn off the system alarm, do one of the following:
• Press the lock button on the remote keyless
entry transmitter. The system will then re-arm itself.
• Press the unlock button on the remote keyless entry
transmitter. This will also disarm the system.
• Insert the key in the driver’s door key lock cylinder
and turn it counterclockwise. This will also disarm
the system.
• Insert the key in the ignition and turn it on. This will
also disarm the system.
2-14