Filter
Top Products
All-Wheel Drive with Stabilitrak
®
With this feature, engine power is sent to all four wheels
all the time.
This is like four-wheel drive, but there is no separate
lever or switch to engage or disengage the front axle.
It is fully automatic, and adjust itself as needed for road
conditions.
The transfer case buttons
are located to the left of
the instrument panel
cluster.
Use these buttons to shift into and out of four-wheel
drive.
You can choose among three driving settings:
d (Stabilitrak
®
): This button is used with the
Stabilitrak
®
system and is also used to shift the transfer
case into Neutral (N). For more information on using
Stabilitrak
®
see Stabilitrak
®
System on page 4-12.
f (All-Wheel Drive): This setting delivers power to
all four wheels as needed depending on road and driving
conditions.
g (4LO): This setting delivers extra torque. You may
never need this setting. It sends maximum power to
all four wheels. You might choose 4LO if you are driving
off-road in deep sand, deep mud, deep snow and
climbing or descending steep hills.
2-33