CH-222 User Manual 6 2005-07-22/17:40
OPERATING INSTRUCTIONS
The Abyss Jr. is a water ripple or undulation simulation effect that requires no additional connections
or a controller to operate. It is especially functional when used to project on a light colored surface,
preferably a pastel or white.
Whether used in a mobile or permanent environment, you may find it useful to control this effect by
means of a relay system for remote switching or to go with DMX control, use the latest in DMX
compatible (Dimmer Relay Pack), all available from CHAUVET.
A relay system will allow you to remotely trigger the Abyss™ Jr. and any other non-dimmable effect
light from a switch panel. Make sure to use a cable of at least 25 feet to provide ample distance
between the control panel and the switch pack for most mobile lighting applications.
If you would prefer to control it directly from your DMX lighting console then we suggest a DMX
compatible (relay switch-pack). These devices are an extremely affordable solution to operating non-
DMX lighting effects remotely.
To learn more about these and other CHAUVET products visit us at www.chauvetlighting.com.