Filter
Top Products
4. Operating Instructions 11 11/29/2010 4:14 PM
Automatic
This fixture has preprogrammed chases. In this mode, the fixture will scroll through each of the
different programs. You may determine the number of times a single program will play before
moving on to the next program, using
n001
~
100
.
Access this mode via the control panel on the back of the fixture. The speed and fade times may
be adjusted, as well. Please see the chart below for further explanation.
1. Press <MENU> until
AUTO
appears on the LED screen.
2. Press <ENTER> to cycle through the different playback modification. See the “Menu
Map” for details on the different selections that are available.
3. Using <UP> and <DOWN>, modify each setting at a time.
Program Selection
This fixture has 22 preprogrammed chases.
Access these via the control panel on the back of the fixture. The speed and fade times may be
adjusted, as well. Please see the chart below for further explanation.
1. Press <MENU> until
Pr**
appears on the LED screen.
2. Press <ENTER>
3. Using <UP> and <DOWN>, select the desired program (
01
~
22
).
4. Press <ENTER> to cycle through the different playback modifications. See the “Menu
Map” for details on the different selections that are available.
5. Using <UP> and <DOWN>, modify each setting at a time.
Programs 01, 21, and 22 have unique options available. For this reason, they have been
listed in a separate section in the “Menu Map”. The available options allow you to select
one of 7 preset colors for both the background and the foreground.
Sound-Active
This fixture has a preprogrammed, sound triggered chase.
Access this via the control panel on the back of the fixture. Adjust the microphone sensitivity from
the control panel. Please see the chart below for further explanation.
1. Press <MENU> until
SU**
appears on the LED screen.
2. Press <ENTER>.
3. Using <UP> and <DOWN>, select the microphone sensitivity (
00
~
31
).
4. Press <ENTER>.
Static Color
This unit has a standalone mode capable of custom color mixing without using a DMX controller.
This is a static mode.
Access this mode via the control panel, which is located on the back of the fixture. Each of the 3
color may be mixed with different intensities. Please see the chart below for further explanation.
1. Press <MENU> until
Colr
appears on the LED screen.
2. Press <ENTER> to scroll through the three different colors (red, green, blue).
3. Using <UP> and <DOWN>, modify the intensity of each of the colors, until the desired
color has been achieved (
000
~
255
).
4. Press <ENTER>.