Casio EX-ZS20 Automobile Electronics User Manual


 
21
Quick Start Basics
NOTE
Each country controls its local time offset and the use of summer time, and so they
are subject to change.
Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
For information about memory card capacities, see page 132.
SD Memory Card (Up to 2GB)
SDHC Memory Card (2GB to 32GB)
SDXC Memory Card (32GB to 2TB)
Use one of the above types of memory card.
The above are supported memory card types as of December 2011.
Noted memory card capacities are standard values.
Use only SD cards that are compliant with the SD Card Association specification.
This camera supports use of Eye-Fi cards.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
Display language: Page 107
Date and time: Page 106
Preparing a Memory Card
Supported Memory Cards