Filter
Top Products
NAVIGATION MENU
22 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
you see the correct road. Select the desired road and tap or double tap to confirm. You can
also enter the name of the road by tapping on the white box at the top.
When entering an address you have the following options;
Tap . Once you have fully entered the destination you want to navigate to and are happy,
you will now be taken to the Route Plan screen (see page 34).
Tap to view the location on the map and once in the map view you can browse the map
(see page 24), to exit from the map view back to the previous screen tap . You also have
the option of selecting a point from this map to navigate to. This can be used to exactly pin point
your destination, or allow you to quickly select a point on the map to navigate to without having to
scroll the map to the area you wish to select around. Place the cursor on the point you would like
to navigate to and tap
. You will be taken directly to the Route Plan screen and your selected
point will be entered as the destination.
Tap
to cancel entering an address and to return to the Search Menu screen.
6.2 Searching for a POI (Point of Interest)
The POI search allows you to quickly find points of
interest like petrol stations and places to eat in a
database of millions of POI. These places can be
either close by or at a distant location.
Tap POI to begin searching through the POI
database.
When tapped the screen will change to the POI
Menu, with two options available for searching for a
POI near Current Position and POI in City.
6.2.1 POI near Current Position
Use this option to search for a POI from a
particular category or for all categories around
your current location as shown on the map (this
will either be your current GPS position or the
position where you last had a GPS lock).
From the POI category screen select the
category for which you want to search in and tap
. The screen will change to show you all
the POI for that category which are near your position starting with the closest.
Scroll through the list using the or keys till you
find the POI you are looking for. Select the item so
that it is highlighted orange then tap or double
tap the item to confirm. You will be taken to the Route
Plan screen (see page 34).
Alternatively you can tap in the white box at the top of
the screen. This will bring up a keyboard screen,