Filter
Top Products
Black plate (7,1)
Cadillac XTS Owner Manual - 2013 - 2nd Print - 8/15/12
Seats and Restraints 3-7
Memory Seats
If available, the SET, "1," "2," and
B (Exit) buttons on the driver door
are used to manually save and
recall memory settings for the driver
seat, outside mirrors, and power tilt
and telescoping steering column.
These manually stored positions are
referred to as Button Memory
positions.
The vehicle will also automatically
save driver seat, outside mirror, and
power tilt and telescoping steering
column positions to the current
driver Remote Keyless Entry (RKE)
transmitter when the ignition is
placed in OFF/LOCK. These
automatically stored positions are
referred to as RKE Memory
positions. See Remote Keyless
Entry (RKE) System Operation on
page 2‑3.
Storing Button Memory Positions
To save positions into Button
Memory for the “1” and “2” driving
positions:
1. Adjust the driver seat, outside
mirrors, and the power tilt and
telescoping steering column to
the desired driving positions.
2. Press and hold SET and “1” at
the same time until a beep
sounds.
3. Repeat Steps 1 and 2 for a
second driver using “2.”
To save positions into Button
Memory for the
B (Exit) button and
easy exit features:
1. Adjust the driver seat, power tilt
and telescoping steering column,
and the outside mirrors on some
vehicles to the desired positions
for getting out of the vehicle.
2. Press and hold SET and
B at
the same time until a beep
sounds.
Recalling Button Memory
Positions
Press and hold "1," "2," or
B to
recall the Button Memory positions.
Releasing "1,” "2," or
B before the
stored positions are reached stops
the recall.
If the ignition is in ON/RUN/START
and the vehicle is parked, briefly
press and release “1,” “2,” or
B to
recall the Button Memory positions.
Placing the ignition in OFF/LOCK
before the stored positions are
reached stops the recall.