Cadillac XTS Automobile Accessories User Manual


 
Black plate (32,1)
Cadillac XTS Owner Manual - 2013 - 2nd Print - 8/15/12
5-32 Instruments and Controls
.
Gap Adjust
.
Upcoming Maneuver from
OnBoard Navigation
.
Upcoming Maneuver from
OnStar
.
Incoming Call
When the HUD is on, the
speedometer reading is continually
displayed, except when an imminent
navigation maneuver is being
shown. The current audio, phone,
or navigation alert temporarily
displays if their status changes. This
occurs if the steering wheel controls
are used to adjust a setting or
acknowledge an alert.
The HUD control is to the left of the
steering wheel.
To adjust the HUD image:
1. Adjust the driver seat.
2. Start the engine.
Use the following settings to adjust
the HUD.
$ (Image Adjustment): Press
down or lift up to center the HUD
image. The HUD image can only be
adjusted up and down, not side
to side.
! (Display View): Press to
select the display view. Release
when the desired display is shown
on the HUD. If vehicle messages
are displayed, pressing the DIC
select button may clear the
message. See Driver Information
Center (DIC) on page 528.
D (Brightness): Lift up and hold
to brighten the display. Press down
and hold to dim the display. Hold
down to turn the display off.
There are four views in the HUD
display:
Metric
English
Speed View: This display gives the
speedometer reading (in English or
metric units), speed limit, Adaptive
Cruise Control speed, Lane
Departure Warning, and Vehicle
Ahead indicator. Some information
only appears on vehicles that have
these features, and when they are
active.