Filter
Top Products
XX LL RR
LEAVING THE VEHICLE
Open the door by pressing the
button at the front of the armrest.
When exiting the vehicle, take the
Keyless Access transmitter with you.
You can lock your XLR using one of
three methods:
1 — Lock the doors with the
power door lock switch (A) located
on the door panel, step out, and
close the door.
2 — Press the Lock button (B) on
the transmitter after you step out
of the vehicle.
3 — Program your vehicle for Passive
Locking, covered previously under
Personalization Features.
VALET LOCKOUT
A valet lockout switch is located
inside the glove box. Press the switch
to ON to disable the use of
the trunk and the convertible top.
The Keyless Access transmitter
cannot open the trunk if the valet
lockout switch is in the ON position.
Press the switch to OFF to enable use
of the trunk and convertible top.
Note:The Keyless Access System also has a
lockout protection feature. See Fob
Reminder under Personalization Features,
covered previously in this guide.
B
A
111830_09a_XLR_GTK_041808.qxp:XLR 2007 A 4/18/08 11:55 AM Page 8