Filter
Top Products
Helpful Hints for Stating Commands
•
When a multiple command is available, choose the
command that works best.
• Words that are in brackets are optional.
For example, for the command Radio [band]
[select] FM, stating Radio FM or Radio select
FM are both valid commands.
• When the system recognizes the command the
system does one of the following:
− Perform the function.
− Ask you to confirm your choice.
− Issue an error message “Did not recognize.
Voice Recognition Canceled.”
• If you experience difficulty with the system
recognizing a command, try saying it more softly,
and wait for a few seconds after the beep, or repeat
the command.
• Background noise may cause voice commands to be
misunderstood, including airflow noise from wind.
• To use the voice recognition system, the map
DVD must be loaded and the navigation system
must be on.
This system is able to recognize commands in three
different languages. The system only recognizes
commands based on the language selected from the
Driver Information Center (DIC). See DIC Vehicle
Customization on page 3-65 for more information.
Voice Recognition Commands
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. The commands are listed with the
optional words in brackets. To use the voice commands,
refer to the instructions listed previously.
Voice Tag Commands
The following are voice tag commands that can be
accessed by clearly stating the commands exactly as
they are written. There are up to 40 voice tag entries
for destinations.
Navigation go to [destination], navigation select:
These commands instruct the system to select a
destination saved under the voice tag you have stored.
The system prompts for a destination name then waits
for you to state the name.
If not currently driving on a route, the system
automatically creates the voice tag destination as
the final destination. If driving on a route, the system
automatically creates the voice tag destination as a
stopover. Up to three stopovers can be created.
4-87