Fog Lamps
Use the fog lamps for better vision in foggy or
misty conditions.
The fog lamp control is located on the turn
signal/multifunction lever.
-(Fog Lamps): The band with/or next to this
symbol is used to turn the fog lamps on and off.
The parking lamps must be on for the fog lamps
to work.
To operate the fog lamps:
• To turn the fog lamps on, turn the fog lamp
band on the lever up to the dot and release
it. The band will return to its original position.
• To turn the fog lamps off, turn the for
lamp band up to the dot and release it. The
band will return to its original position, and the
fog lamps will turn off. If the high-beam
headlamps are turned on, the fog lamps will
also turn off. They will turn back on again
when you switch back to low-beam
headlamps.
Some localities have laws that require the
headlamps to be on along with the fog lamps.
Exterior Lighting Battery Saver
If the parking lamps or headlamps have been left
on, the exterior lamps will turn off about
10 minutes after the ignition is turned to OFF. This
protects against draining the battery in case the
headlamps or parking lamps have been left
on. The battery saver does not work if the
headlamps are turned on after the ignition is turned
to OFF.
If you need to leave the lamps on for more than
10 minutes, use the exterior lamp control to
turn the lamps back on.
175