Filter
Top Products
If the position you are
using has an adjustable
head restraint and you are
using a dual tether, route
the tether under the head
restraint and in between
the head restraint posts.
If the position you are
using has an adjustable
head restraint and you are
using a single tether, route
the tether under the head
restraint and in between
the head restraint posts.
6. Push and pull the child restraint in different
directions to be sure it is secure.
Securing a Child Restraint in a Rear
Seat Position
If your child restraint is equipped with the LATCH
system, see Lower Anchors and Tethers for Children
(LATCH) on page 1-39.
If your child restraint does not have the LATCH system,
you will be using the lap-shoulder belt to secure the
child restraint in this position. Be sure to follow the
instructions that came with the child restraint. Secure
the child in the child restraint when and as the
instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.
1-44