Sunroof
Your vehicle may have a power sunroof. It will operate
when the ignition is turned on, or in Accessory, or
when Retained Accessory Power (RAP) is active.
See Retained Accessory Power (RAP) on page 2-24.
The sunroof controls are
located on the overhead
console.
@ (Half Open): Turn the control clockwise to this
position to open the glass panel half way. The sunshade
will open with the glass panel, or it can be opened
manually.
P (Comfort Stop): Turn the control clockwise
to this position to open the glass panel about
three quarters of the way open. The sunshade will open
with the glass panel, or it can be opened manually.
This is called the comfort stop position. It provides less
wind noise than the full-open position.
A (Full Open): Turn the control clockwise to this
position to open the glass panel all the way. The
sunshade will open with the glass panel, or it can be
opened manually.
I (Vent): Turn the control counterclockwise to this
position to use the vent feature. The glass panel will
tilt upward from the vehicle. The sunshade must
be opened manually.
? (Close): Turn the control to this position to close
the sunroof. The sunshade must be closed manually.
Anti-Pinch Feature
If an object is in the path of the sunroof when it is
closing, the anti-pinch feature will detect the object
and stop the sunroof from closing at the point of
the obstruction. The sunroof will then return to the
full-open or vent position. To close the sunroof once it
has re-opened, turn the control to the closed position.
2-51