Bushnell 360500 GPS Receiver User Manual


  Open as PDF
of 14
 
4
Fig. 6
Fig. 7
8
• Youcanuse thefiveicons (andup to 20numbers)
to mark different locations of any kind (your truck,
treestand, a campsite, etc.). Be sure you select a
differenticonor#tostoreeachnewlocation.Ifyou
hold down MARK with a previously used location
iconstillselected,youwillreplacethatonewithyour
currentlocation.
• Toexpandorrestrictthenumberof“extra”locations
(numbersfrom1to20)thatareavailable,PressSETUP
(4)threetimesuntilthelocationarrowonthelower
right is highlighted. Press MARK(2), then use the
TRIP/DATAorSETUPbuttonstodecreaseorincrease
thenumberbelowthearrow(Fig. 6).PresstheMARK
buttontoconfirmandreturntotheSetupscreen.
AUTO POWER OFF/BACKLIGHT
• Powerautomaticallyturnsoffafter10minutesifno
buttons have been pressed (except in Trip mode,
described next). HOLD POWER to turn the unit off
manually.
• PresstheMARKbuttontoturnthedisplaybacklight
on.Itautomaticallyturnsoffafter30seconds.
COMPASS CALIBRATION
• Toensuredirectional accuracy, hold theHuntTrack
outinfrontofyouandmoveitina“Figure8”pattern
a few times to re-calibrate the compass (Fig. 7). A
compasscalibrationvideoisavailableat:http://www.
bushnell.com/products/gps/instruction-videos/.
• For best results, we recommend holding the
HuntTrack inahorizontalposition(nottilted)during
use(Fig. 8).
Fig. 8
 previous next