Filter
Top Products
4
1. Open the battery cover on the back of the BackTrack (slide it down as shown by the arrow, then lift it straight up), insert
two AAA batteries (alkaline or lithium), and replace the cover. Change batteries when low power is shown by the battery
indicator icon. Make sure the battery contacts are clean and replace both batteries at once. Remove the batteries when
storing the unit longer than a few weeks.
2. HOLD (keep pressed for 2 seconds) the MODE/POWER button to turn on the BackTrack. The BackTrack is ready
to use when the Satellite icon on the display stops flashing (be sure you are outdoors with a clear view of the sky).
HOLD MODE/POWER Button
Take the
BackTrack
Outdoors
”Satellite” Icon Not Flashing
Slide, Then Lift Cover to Open
Batteries Inserted