Bush Hog TH4400 Automobile User Manual


 
3. Stop completely.
4. Shift into forward and drive.
If the hubs remain engaged after following these instructions, return
the vehicle to your dealer for service.
NOISE EMISSION CONTROL SYSTEM
TAMPERING WITH NOISE CONTROL SYSTEEM IS PROHIBITED!
U.S. Federal law prohibits the following acts or the causing thereof:
1. The removal or rendering inoperative by any person other than
for purposes of maintenance, repair, or replacement of any
device or element of design incorporated into any new vehicle for
the purpose of noise control prior to its sale or delivery to the ulti-
mate purchaser or while it is in use or
2. The use of the vehicle after such device or element of design has
been removed or rendered inoperative by any person.
“AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPER-
ING ARE THE ACTS LISTED BELOW,”
1. Removal or alteration or the puncturing of the muffler or any
engine component which conducts removal of engine exhaust gases.
2. Removal or alteration or the puncturing of any part of the engine air
induction system.
3. Replacement of any vehicle parts with parts not in compliance with
federal regulations.
4. Lack of proper maintenance.
WARNING
OPERATING WITH ONLY ONE FRONT HUB ENGAGED
COULD RESULT IN LOSS OF CONTROL, ACCIDENT, AND
SEVERE INJURY OR DEATH.
WHEN HUB ENGAGEMENT SYMPTOMS ARE PRESENT,
USE THE DISENGAGING PROCEDURE BEFORE PRO-
CEEDING.
45